Printer Code Expire Print Info Sheet Again
Message
Error lawmaking
Indicator
Cause/Solution
Detected an abnormality of internal database.
The information must be deleted.
After pressing [Enter], the data volition be deleted, and then reboot.
-
-
Database in the machine has been broken.
Printing «ENTER» button.
PU Flash Error
-
Goes off
Turn off the motorcar, and then dorsum on.
If the same error occurs, contact your dealer.
Data Present
-
-
Information remains unprinted.
To manually print, printing «ON LINE» button.
To delete the data without printing, press «CANCEL» button.
Irresolute Language
Please wait
-
Blinks
Display linguistic communication is being changed.
Wait for a while.
Language Modify Failed
Mistake num: %Lawmaking%
-
Blinks
Switching display languages failed.
Press the power push to turn off the machine, and then back on.
30
%COLOR% Toner Low.
Search keyword: P10081
-
Lights upwards
The toner indicated on the screen is low. Accept a new toner cartridge ready.
And supersede the old image drums with new ones after a bulletin for replacement of epitome drum appears.
XXX
%Colour% Waste product Toner Full. Replace Toner.
Search keyword: P40028
-
Lights upwards
Waste matter toner is full. Replace with a new toner cartridge of the indicated colour.
The printer tin can exist used for a while when the front embrace is opened and closed. However, replace with a new toner cartridge chop-chop as the image drum might become damaged.
XXX
%COLOR% Toner Sensor Fault.
%COLOR% Non Recommended Toner.
Search keyword: P40947
-
Lights up
An optimum toner cartridge is not installed.
Use a toner cartridge that matches your automobile.
The print quality is not guaranteed.
XXX
Toner Sensor Error.
Search keyword: P40959
540, 541, 542, 543
Lights up
Something is incorrect with the toner sensor of the indicated color or the image drum is not installed correctly.
Install the toner cartridge or image drum of the indicated color correctly.
If the error occurred in Yellow (Y) or Magenta (M), make sure that the bluish knob on the belt unit is turned sideway.
If the aforementioned error occurs, contact your dealer.
540: Xanthous, 541: Magenta (ruddy), 542: Cyan (blueish), 543: Black
30
Error Postscript
-
-
A postscript error has occurred.
The job has been dismissed.
Xxx
PDL Fault Occurred
-
-
PDL error has occurred.
To erase the message, printing «ENTER» button.
Thirty
%Color% Epitome Drum Near Life.
Search keyword: P10076
-
Lights up
Set new image drums.
And supplant the old image drums with new ones after a message for replacement of image drum appears.
XXX
Fuser Unit of measurement Near Life.
Search keyword: P10979
-
Lights up
Set up a new fuser unit.
And replace the erstwhile fuser unit with new ones after a message for replacement of fuser unit appears.
Xxx
Belt Unit of measurement Near Life.
Search keyword: P10978
-
Lights upwardly
Fix a new chugalug unit of measurement.
And supersede the onetime belt unit of measurement with new ones later on a message for replacement of belt unit appears.
XXX
Not Recommended Fuser Unit Detected.
Search keyword: P40439
-
Lights upwardly
An optimum fuser unit is non installed.
Apply a fuser unit that matches your machine.
The print quality is not guaranteed.
30
Change Fuser Unit.
Search keyword: P40971
-
Lights upwardly
The fuser unit reaches its lifetime.
Replace the fuser unit with a new one.
XXX
Non Recommended Belt Unit Detected.
Search keyword: P40444
-
Lights up
An optimum chugalug unit is not installed.
Utilise a chugalug unit of measurement that matches your machine.
The print quality is not guaranteed.
XXX
Change Chugalug Unit.
Search keyword: P40970
-
Lights upwards
The belt unit reaches its lifetime.
Supplant the belt unit of measurement with a new i.
XXX
%COLOR% Toner Empty.
Search keyword: P40028
-
Lights upwardly
The toner indicated on the screen is empty. Replace the empty toner cartridge with a new ane.
XXX
%COLOR% Toner Non Installed.
Search keyword: P40902
-
Lights up
The toner cartridge of the indicated color is not installed correctly.
Install the toner cartridge correctly.
Xxx
%Colour% Non Recommended Image Drum Detected.
Search keyword: P40485
-
Lights upwards
An optimum image drum is not installed.
Use a paradigm drum that matches your machine.
The print quality is not guaranteed.
XXX
%Color% Image Pulsate Life.
Search keyword: P40936
-
Lights up
The image drum indicated on the screen reaches its lifetime.
Replace the image drum with a new one.
Thirty
%Color% Image Drum Life, %PAGES% Pages Left.
Search keyword: P40936
-
Lights upwardly
The epitome drum indicated on the screen reaches its lifetime.
The number of pages you lot tin can impress is displayed in "%PAGES%".
XXX
%COLOR% Image Pulsate Life, Print Quality Non Guaranteed.
Search keyword: P40936
-
Lights up
The image drum indicated on the screen reaches its lifetime.
Replace the prototype pulsate with a new one.
The print quality is non guaranteed.
30
%TRAY% Empty
-
Lights upward
No paper is loaded in the indicated tray.
Load paper.
Other trays are available.
30
File Organisation is Total
-
Lights upwards
Retentivity in the file arrangement is full.
Delete unnecessary files.
30
File System is Write Protected
-
Lights upwardly
The file you are trying to write is write-protected.
Contact the printer administrator.
Xxx
File Erasing
-
Lights upwards
Stored certificate files are being deleted.
Wait for a while.
Deleting data
-
Lights up
This machine ran out of color toner. Color print information is being deleted.
Wait for a while.
30
Deleting data
-
Lights upwardly
Deleting data stored in private press.
Wait for a while.
XXX
Erased Data Full
-
Lights upwardly
Files supposed to be deleted are full. Erase the files.
XXX
Wait Timeout is Disabled
-
Lights up
Wait Timeout is disabled.
Thirty
Job Log Buffer Total(Delete old logs)
-
-
Sometime job logs were deleted, because job log buffer was full.
Xxx
NFC Unit Error. NFC function is not available.
Press ONLINE Button
-
-
There is something wrong in the NFC unit.
Functions related to the NFC are not available.
Plough off the machine, and then dorsum on.
If the same mistake occurs, contact your dealer. To hibernate this message, select [Admin Setup] > [Others Setup] > [NFC Setup], and and so select [Disable].
XXX
USB Hub Unsupported
Please detach it
-
-
A USB hub is connected. Remove the USB hub.
This machine does not support USB hub.
Thirty
Unsupported USB Device Detected
Delight detach it
-
-
An unsupported USB device is connected.
Remove the USB device.
Xxx
Incompatible USB device connected
Please detach it
-
-
An unsupported USB device is connected.
Remove the USB device.
XXX
No advice with the SNTP server.
-
-
Obtaining current time from the SNTP server failed.
Check the server or network connection.
XXX
Getting target IP failed. Please check DHCP settings.
-
-
The DHCP server cannot exist detected.
Check the network connection.
Thirty
Collate Neglect:Also Many Pages
Press ONLINE Button
-
-
A collate impress error has occurred.
Reduce the data amount. If that does not work, reduce the size of the impress data.
To erase the bulletin, press «ONLINE» button.
Xxx
Failed to read or write the usage direction information of Print Quantity
Press ONLINE Button
-
Lights upward
The usage management information could not be read.
Press «ONLINE» button.
XXX
Duplex Print Failed
Printing ONLINE Button
-
Lights up
For the paper setting that a duplex press is not possible, information technology was printed in simplex.
Cheque the size and thickness of newspaper.
30
Color Restricted. Mono Printed
Press ONLINE Button
-
Lights upwards
A color print job was converted to a mono print job due to an unauthorized user. Contact your administrator for color press.
To erase the message, press «ONLINE» push.
Xxx
Colour Restricted. Task Rejected
Press ONLINE Push button
-
Lights up
A colour print chore was deleted due to an unauthorized user. Contact your administrator for colour printing.
To erase the bulletin, press «ONLINE» button.
XXX
Print Restricted. Job Rejected
Press ONLINE Button
-
Lights up
A print task was deleted due to an unauthorized user. Contact your administrator for printing.
To erase the message, press «ONLINE» button.
XXX
Log Buffer is Full. Job Rejected
Press ONLINE Button
-
Lights up
Print information is deleted because the accounting log buffer is full.
Contact a printer administrator and remove the log buffer.
XXX
Expired saved files accept been deleted
Press ONLINE Button
-
Lights up
Individual press files whose storage menses expired were automatically deleted.
To erase the message, printing «ONLINE» button.
XXX
E-mail receiving has been cancelled
Printing ONLINE Button
-
Lights up
Indicates that Email receiving has been canceled.
It has the following possibilities.
-
The format of email that has received is illegal or not supported.
-
The attached file is illegal or non supported.
-
The attached file that has received is too large.
-
Network connection has disconnected.
Xxx
File System Operation failed <nnn>
Printing ONLINE Button
-
Lights upwards
An error has occurred in the file system.
To erase the message, printing «ONLINE» push.
XXX
Invalid Impress Data Received
Press ONLINE Button
-
-
Invalid information received.
If you lot performed individual press, the data was deleted considering it was incomplete. Impress again.
To erase the message, printing «ONLINE» button.
XXX
Task Log Database Mistake
Contact the device administrator
Press ONLINE Button
-
-
A data base of operations access error has occurred while writing or reading the job log.
Turning off and on the motorcar may resolve the trouble.
To erase the message, press «ONLINE» push.
Thirty
IPv4 Accost is conflicted
Change IPv4 Address
-
-
The IP accost assigned to this machine is duplicated with that of some other device.
Cheque the IP addresses, and then assign another IP address.
XXX
Mistake PDF
Press ONLINE Push button
-
-
The PDF file is damaged.
Check the file.
To erase the message, press «ONLINE» button.
XXX
Invalid Password
Press ONLINE Button
-
-
Notifies that the entered password does not lucifer the password set to encrypted PDF.
The file will not be printed unless the passwords match.
XXX
PDF Cache Write Error
Press ONLINE Button
-
-
Notifies that writing a PDF file to the enshroud has failed.
To erase the message, press «ONLINE» button.
XXX
Decode error occurred
Press ONLINE Push
-
-
Indicates that an fault has occurred during assay of image data input from an external source.
This appears when an error has occurred during analysis of TIFF or JPEG data in USBMemoryPrint, DirectPrint, Eastward-mailPrint mode.
To erase the bulletin, press «ONLINE» button.
XXX
Can not read the file
Press ONLINE Button
-
-
The USB Memory was removed while printing from USB Retentivity. Practise not remove USB Retentiveness while printing is in progress.
To erase the message, press «ONLINE» push button.
XXX
Colour toner empty. Chore cancelled
Press ONLINE Button
-
-
The print data was cancelled because colour toner is empty.
To erase the message, press «ONLINE» button.
XXX
Job Type restricted
Job rejected
Press ONLINE Button
-
-
A job of a JobLimitation setting violation is received, and when discarding the job, it'southward indicated.
To print this job, contact the printer ambassador.
Install Paper
MPTray
%MEDIA_SIZE%
Press ONLINE Push button
-
Goes off
Transmission Printing from the MP tray is specified.
Load the newspaper of the size indicated in the MP tray, and and then printing the «ONLINE» push button.
Alter Paper in %TRAY%
%MEDIA_SIZE%
%MEDIA_TYPE%
Press ONLINE Button
Please see HELP for details
661, 662, 663, 664, 665
Blinks
Paper loaded on the indicated tray does not match selected newspaper size. Check the paper settings on the awarding and on the tray, and match the settings.
661: Tray ane, 662: Tray 2, 663: Tray iii, 664: Tray 4, 665: Tray five
Change Paper in MPTray
%MEDIA_SIZE%
%MEDIA_TYPE%
Press ONLINE Push
Please see HELP for details
660
Blinks
Paper loaded on the MP tray does not match selected paper size. Check the paper settings on the awarding and on the MP tray, and match the settings.
Change Paper in %TRAY%
%MEDIA_SIZE%
%MEDIA_TYPE%
Printing ONLINE Push button
Please see HELP for details
461, 462, 463, 464, 465
Blinks
Paper loaded on the indicated tray does not match selected paper size. Bank check the paper settings on the application and on the tray, and match the settings.
For paper which can exist set both horizontally and vertically, check the direction of paper.
461: Tray 1, 462: Tray two, 463: Tray 3, 464: Tray 4, 465: Tray v
Install Paper
MPTray
%MEDIA_SIZE%
Press ONLINE Push
Please run into Assistance for details
460
Blinks
Paper loaded on the MP tray does not friction match selected paper size. Cheque the newspaper settings on the application and on the MP tray, and match the settings.
For newspaper which can be set both horizontally and vertically, bank check the management of paper.
Summary Account balance is 0.
%USERNAME%
%ACCOUNTNAME%
Increase the balance and press [Enter]
Press [Cancel] to cancel.
-
Blinks
The number of print jobs excesses the limit.
No more than print jobs are authorized.
Contact the printer administrator.
Remove Paper
Output Tray
Please see Assistance for details
480
Blinks
Newspaper in the output tray is full.
Remove the handout.
Press ONLINE Button for Restoration
Memory Overflow
Please see Aid for details
420
Blinks
Information is as well complicated.
Memory full error has occurred during processing.
Reduce the book of the print information.
If the same error is displayed again, contact your dealer.
Insufficient retention.
If using multiple functions, end the function being used earlier attempting some other.
If the problem does not ameliorate, reduce the resolution.
Printing ONLINE Button
-
Blinks
Retentiveness is full.
Print after the ongoing operation is over.
If the error persists, lower the image quality on the printer driver.
Wireless startup failed
Press ONLINE Button
Please see Help for details
517
-
Restart this machine.
If the error still persists fifty-fifty afterward the reboot, power off this machine and cheque if the wireless LAN module is installed.
If the wireless LAN module is not installed, ready [Wireless Module] in [Boot Menu] to [Disable].
If the wireless LAN module is installed, check if the model proper noun of the wireless LAN module is compatible with this car.
If the model proper name is incorrect, replace the wireless LAN module with the ane suitable for this car.
If the model name is correct, contact your dealer.
This wireless firmware version does non operate on this device
Press ONLINE Push
Delight see Assistance for details
504
-
The version of the firmware does not match this car.
Contact your dealer.
Wireless settings are incomplete
Press ONLINE Push
Please see HELP for details
505
-
Incorrect values are prepare or items remain unset in the wireless LAN settings.
Check the wireless settings.
If the error persists, initialize the network settings, and gear up the wireless LAN settings once more.
Not connected to wireless access point
Press ONLINE Button
Delight see Assistance for details
506
-
No wireless LAN access points are constitute.
Make certain that the access point is turned on.
Disconnect and re-connect to wireless LAN.
Wait a Moment
Message Data Processing
-
-
Updating letters displayed on the operator panel.
Delight wait.
Wait a Moment
Bulletin Information Writing
-
-
Updating letters displayed on the operator console.
Delight wait.
Ability Off/On
Bulletin Data Received OK
-
-
Updating letters displayed on the operator panel is completed.
Turn the power of the printer off and on once more.
Check Data
Message Data Write Error<%CODE%>
-
-
Writing of bulletin data to be uploaded to a printer has been failed.
Check if the message data to be updated matches the printer.
Press ONLINE Button for Restoration
Receiving Data Timeout
Please meet Assistance for details
519
Blinks
When receiving data by Port9100, LPR, FTP, IPP, WSD, or Email, a timeout occurred in stream.
Firmware Update Fault
Delight attempt again
If network doesn't piece of work, please try firmware update over USB
-
-
Updating the firmware failed.
Update again.
Install Paper
%TRAY%
%MEDIA_SIZE%
Delight see Help for details
491, 492, 493, 494, 495
Blinks
No paper is loaded in the indicated tray. Load paper of the displayed size.
491: Tray 1, 492: Tray ii, 493: Tray 3, 494: Tray 4, 495: Tray 5
Install Newspaper
MPTray
%MEDIA_SIZE%
Please encounter Assistance for details
490
Blinks
MP tray is empty.
Prepare newspaper.
If paper is set, newspaper set embrace is not fix. Lower the paper ready embrace.
Install Paper Cassette
%TRAY%
Delight come across HELP for details
430, 431, 432, 433, 434, 440, 441, 442, 443
Blinks
A paper cassette is not in the indicated tray.
Insert the newspaper cassette into the indicated tray.
If the cassette is already inserted in the printer, pull out the cassette and ready it over again to correctly locate it.
430, 440: Tray ane
431, 441: Tray 2
432, 442: Tray 3
433, 443: Tray four
434: Tray v
Supersede Toner
%COLOR% Waste Toner Full
Please see HELP for details
415, 416
Blinks
Waste toner of the toner cartridge is total. Opening and closing the forepart cover can resume printing for a while, but information technology may damage the prototype drum. Supersede the toner cartridge with a new ane equally soon equally possible.
415: Magenta (red), 416: Cyan (blue)
Install Toner
%Color%
Delight see HELP for details
410, 411, 412, 413
Blinks
The indicated cartridge ran out of toner.
Opening and endmost the front cover can resume press for a while, merely it may damage the image drum. Supercede the toner cartridge with a new one as soon as possible.
410: Yellow, 411: Magenta (cherry), 412: Cyan (blue), 413: Blackness
Not Recommended Toner
%Color%
Please run across HELP for details
549, 550, 551, 552, 553, 554, 555, 556, 557, 614, 615, 616, 617, 620, 621, 622, 623
Blinks
The indicated toner cartridge is not optimum.
We recommend using an optimum toner cartridge.
550, 554, 614, 620: Yellow
551, 555, 615, 621: Magenta (red)
552, 556, 616, 622: Cyan (blue)
549, 553, 557, 617, 623: Blackness
Toner Not Installed
%COLOR%
Delight see Aid for details
610, 611, 612, 613
Blinks
The supplied starter toner cartridges are installed in the consumable image drums.
Install the consumable toner cartridges in the consumable image drums.
610: Yellow, 611: Magenta (red), 612: Cyan (blue), 613: Black
Non Recommended Image Pulsate
%COLOR%
Please meet Aid for details
684, 685, 686, 687, 690, 691, 692, 693, 700, 701, 702, 703, 704, 705, 706, 707
Blinks
The indicated prototype pulsate is not optimum.
We recommend using an optimum Image Drum.
684, 690, 700, 704: Yellow
685, 691, 701, 705: Magenta (red)
686, 692, 702, 706: Cyan (blue)
687, 693, 703, 707: Blackness
Image Drum Not Installed
%COLOR%
Please see Assist for details
694, 695, 696, 697
Blinks
The indicated prototype drum is not installed.
Install the image drum.
694: Yellow, 695: Magenta (scarlet), 696: Cyan (blueish), 697: Black
Caution: Non-Genuine Consumable detected
Check user's transmission "Problem Shooting" to restore machine operation
709
Blinks
This error ways that a non-OKI Original consumable has been installed in the automobile.
The warranty is applicable when the production is used with its designated OKI Original consumables. Use caution when choosing other consumables. The entire risk as to the quality and functioning of the product due to the use of non-OKI Original consumables is with you. Should the production evidence lacking due to non-OKI Original consumables, you assume the cost of all necessary servicing, repair or correction, as our warranty may non cover these defects.
To accept these risks and to restore function:
one) Turn off your printer.
2) Plow the car on. Press the «Cancel» button when [PLEASE WAIT] is displayed.
3) Release the «CANCEL» push button when [Set To Print] is displayed.
Note: This performance will be recorded for future reference.
Newspaper jam occurred
Newspaper remained in %NUM% place(south)
Remove the newspaper
Press Help for details
632, 633, 634, 635
Blinks
A newspaper jam has occurred and newspaper remains in the paper input expanse.
Remove the jammed paper.
632: Tray2, 633: Tray3, 634: Tray4, 635: Tray5
637
Blinks
Paper has jammed effectually the front encompass. Open the forepart cover and remove the jammed paper.
638
Blinks
Paper has jammed nether the epitome drum.
Remove the jammed paper.
639, 640
Blinks
A paper jam has occurred and paper remains almost the fuser unit of measurement.
Remove the jammed paper.
639, 640: Fuser unit of measurement
641, 642
Blinks
A paper jam has occurred and paper remains near the duplex unit of measurement.
Remove the jammed newspaper.
641: Duplex unit of measurement, Behind of the duplex unit
642: Duplex unit, Middle part of the duplex unit
Toner Sensor Mistake
%COLOR%
Delight come across Assist for details
540, 541, 542, 543
Blinks
The toner cartridge of the indicated color is non locked properly.
Check to make sure the blue lever (toner cartridge lock lever) of the toner cartridge is turned until it lines upwards with the 
in the far end.
If the error occurred in Cyan and the toner cartridge lock lever is turned until it is lined up with the in the far cease, check if the 2 blue knobs on the belt unit of measurement are properly locked.
540: Yellowish, 541: Magenta (scarlet), 542: Cyan (blueish), 543: Blackness
Check Paper
Paper Multi Feed
%TRAY%
Please meet Assistance for details
401
Blinks
The indicated tray fed multiple sheets of paper at a time.
Remove the cassette from the tray, and and then load paper once again.
After loading, open and close the front comprehend to release the error.
Check Paper
Paper Size Error
%TRAY%
Please run across HELP for details
400
Blinks
Paper size fault has occurred in the indicated tray. Make sure that the size made by newspaper loaded in the tray matches the setting made by the paper size dial in the paper cassette. Load paper according to the paper size and direction set for the paper size dial.
If the setting fabricated by the paper size dial is incorrect, cancel printing outset, set the paper size punch, and and then print again.
Make sure that the cassette does non feed multiple sheets of paper at a time afterward starting printing. If it happens, remove paper, and then load paper correctly.
Open and close the front cover to release the error.
Paper jam occurred
Paper remained in %NUM% place(s)
Remove the paper
Printing Help for details
390
Blinks
A paper jam has occurred in the paper feed path from the MP tray.
Remove the jammed paper.
391, 392, 393, 394, 395
Blinks
A paper jam has occurred in the paper feed path from the indicated tray.
Remove the jammed paper.
If paper is not jammed, feeding paper may fail.
Reduce the number of sheets of paper loaded on the newspaper cassette. Brand certain that the paper stoppers are ready in the right position.
391: Tray 1, 392: Tray 2, 393: Tray iii, 394: Tray 4, 395: Tray 5
380
Blinks
A paper jam has occurred effectually the front embrace.
Open the front end cover and remove the jammed paper.
If jammed newspaper is invisible, shut the front cover. If the error persists, paper jams may occur in the duplex unit.
381
Blinks
Newspaper has jammed under the epitome drum.
Remove the jammed newspaper.
382, 383, 385
Blinks
A newspaper jam has occurred around the fuser unit.
Remove the jammed paper.
382: The back of the automobile, around the output bin
383: The back of the machine, effectually the duplex unit
385: Inside of the automobile, around the fuser unit
370, 371, 373
Blinks
A paper jam has occurred around the duplex unit.
Pull out the duplex unit and remove the jammed paper.
For the Fault lawmaking 373, make sure that paper does not remain inside the printer after pulling out the duplex unit.
372
Blinks
A paper jam has occurred in the paper feeding path from the duplex unit of measurement.
Open the forepart cover and remove the jammed paper.
If paper is invisible, pull out the duplex unit of measurement from the back side of the motorcar and bank check if paper jams within of the duplex unit of measurement or machine.
Install Duplex Unit of measurement
Please see Assist for details
360
Blinks
The duplex unit is not properly installed. Install the duplex unit of measurement.
Install New Paradigm Pulsate
Image Drum Life
%COLOR%
Please see HELP for details
350, 351, 352, 353
Blinks
The paradigm drum indicated on the screen reaches its lifetime.
Replace the paradigm drum with a new 1.
Opening and closing the front cover tin can resume printing for a while. Supervene upon with a new ane equally presently as possible, withal.
350: Yellow, 351: Magenta (red), 352: Cyan (blue), 353: Black
Install New Epitome Drum
Image Drum Life
%Color%
Delight run across Assist for details
560, 561, 562, 563
Blinks
The image pulsate indicated on the screen reaches its lifetime.
Replace the prototype drum with a new 1.
560: Yellow, 561: Magenta (ruddy), 562: Cyan (blue), 563: Black
Install New Image Drum
Image Pulsate Life
%Colour%
To Exceed the Life, Press Online Button
Please come across HELP for details
564, 565, 566, 567
Blinks
The image drum indicated on the screen reaches its lifetime.
Replace the prototype drum with a new one.
Pressing «ONLINE» push tin resume printing for a while. Supplant with a new one as before long every bit possible for maintaining the impress quality.
564: Yellow, 565: Magenta (ruby-red), 566: Cyan (blue), 567: Black
Install New Image Drum
Printing disabled due to low threshold of Image Drum life.
%Colour%
Please run across Help for details
680, 681, 682, 683
Blinks
Printing has stopped because the image pulsate indicated on the screen reached its lifetime. Replace with a new image drum to impress.
680: Xanthous, 681: Magenta (red), 682: Cyan (blue), 683: Black
Install New Fuser Unit of measurement
Fuser Unit of measurement Life
Please meet Assistance for details
354
Blinks
The fuser unit reaches its lifetime.
Supersede the fuser unit with a new ane.
Opening and closing the front embrace can resume printing for a while. Replace with a new one every bit soon as possible for maintaining the print quality.
Install New Belt Unit
Chugalug Unit Life
Delight run across Assistance for details
355
Blinks
The belt unit reaches its lifetime.
Replace the chugalug unit of measurement with a new one.
Opening and closing the cover tin resume printing for a while. Replace with a new one as presently as possible for maintaining the impress quality.
Check Fuser Unit
Delight run across HELP for details
348
Blinks
The fuser unit is not properly installed. Remove and re-install the fuser unit. If the error persists afterward re-installing, supercede the fuser unit with a new ane.
Install New Belt Unit of measurement
Belt Unit of measurement Life
Please see Assistance for details
356
Blinks
Waste toner of the belt unit is full. Replace the chugalug unit with a new one. Opening and closing the forepart cover can resume printing. Printing stops subsequently 500 sheets are printed.
Check Toner Cartridge
Improper Lock Lever Position
%Color%
Please see HELP for details
544, 545, 546, 547
Blinks
A color toner cartridge indicated on the screen is not installed.
Brand certain to plough the toner cartridge lock lever (blue) on the right side of the cartridge until it lines up with the in the far end. If the lever is in the correct position, check that the white protective tape has been removed.
544: Yellow, 545: Magenta (red), 546: Cyan (blueish), 547: Black
Check Image Drum
%Colour%
Delight encounter HELP for details
340, 341, 342, 343
Blinks
The indicated image drum is not installed correctly.
Remove and re-install the paradigm drum.
340: Yellow, 341: Magenta (ruddy), 342: Cyan (blue), 343: Black
Check Fuser Unit
Please run into Aid for details
320
Blinks
The fuser unit of measurement is not properly installed. Remove and re-install the fuser unit.
Non Recommended Fuser Unit
Delight see Aid for details
698-01, 698-02, 698-03, 698-04, 698-06
Blinks
Check the model number of the fuser unit mentioned in the User'due south manual. Use a fuser unit that matches your machine.
Fuser Unit of measurement Not Installed
Please see Assistance for details
699
Blinks
The fuser unit is not properly installed. Remove and reinstall the fuser unit.
Check Belt Unit
Please see Assistance for details
330
Blinks
The belt unit is not properly installed. Remove and re-install the chugalug unit.
Non Recommended Belt Unit
Please run across HELP for details
688-01, 688-02, 688-03, 688-04
Blinks
Check the model number of the chugalug unit mentioned in the User'due south transmission. Use a chugalug unit that matches your machine.
Belt Unit of measurement Not Installed
Delight see HELP for details
689
Blinks
The belt unit of measurement is not properly installed. Remove and reinstall the belt unit.
%Encompass% Open.
Delight meet Assist for details
310, 311
Blinks
Indicated encompass is open. Close the cover.
310: Output tray (Top comprehend), 311: Forepart cover
Wait a Moment
Rebooting <due north>
-
Lights up
Rebooting the printer.
Look for a while.
Power Off and Wait for a while
126:Condensing Error
Fatal 126
Blinks
A condensation has occurred inside a printer.
Turn the printer off and plough on again later on a while.
Ability Off/On
nnn:Error
131, 132, 133, 134
Blinks
The LED caput cannot be detected.
131: Xanthous (Y)
132: Magenta (G)
133: Cyan (C)
134: Black (Grand)
136-02, 136-03, 136-04, 980
Blinks
An error has occurred in or around the fuser unit.
Turn off the printer and turn on again subsequently a while.
If the error persists after rebooting, contact your dealer and tell them the number in the fault bulletin and how the car works.
166-03
Blinks
The inside of the printer is hot. Remove any objects blocking the ventilation holes on the printer, and restart the printer. If the same error is displayed again, contact your dealer.
166-04
Blinks
The inside of the printer is at a depression temperature. Raise the room temperature, then restart the printer. If the aforementioned mistake is displayed again, contact your dealer.
181
Blinks
This is a duplex unit mistake. Plow the power off, and re-install the duplex unit. If the same error is displayed again, contact your dealer.
231-05, 231-06, 231-07, 231-08, 231-23
Blinks
Reading the consumables information failed.
If the following number is displayed, replace the corresponding consumable.
231-05 to 231-08: Toner cartridge / Prototype pulsate
231-23: Fuser unit/ Belt unit
Plough off the printer and plow on again afterwards a while.
If the error persists afterwards rebooting, contact your dealer and tell them the number in the mistake message and how the machine works.
260, 261, 262, 263, 264, 265, 266, 267, 268, 269, 270, 271, 272, 273, 274
Blinks
An error has occurred in or effectually the fuser unit of measurement.
Check that size and thickness of paper in the tray is correctly.
Turn off the printer and plough on again afterwards a while.
If the error persists after rebooting, contact your dealer and tell them the number in the mistake message and how the machine works.
904
Blinks
The belt unit is at a low temperature. Raise the room temperature, then restart the printer. If the same error is displayed once again, contact your dealer.
nnn*
Blinks
An error occurred inside the printer.
Turn off the car, and and then back on.
If the same fault occurs, contact your dealer.
"*" is a 3-digit error code. The number that is displayed changes according to the error content.
Ability Off/On
nnn:Fatal Fault
PC:nnnnnnnn
LR:nnnnnnnn
FR:nnnnnnnn
Fatal, 002~011, F0C, F0D, FFE, FFF
Blinks
A fatal error occurred on the printer.
Contact your dealer and tell them the number in the error bulletin and how the machine works.
The error code is displayed within the range 0x001 to 0xfff.
Source: https://www.oki.com/printing/online-manuals-12/470955/id/contents/contents/qa_000003.html
0 Response to "Printer Code Expire Print Info Sheet Again"
Post a Comment